NEC UX5000 - Page 270

Park and Page
252 ◆ Chapter 2: Features UX Mail Manual
Related Features
Auto Attendant Do Not Disturb (page 60)
Auto Attendant Do Not Disturb disables Park and Page.
Greeting (page 153)
● When the Paging Message is on and the mailbox has a greeting recorded, Park and Page functions
normally.
● When the Paging Message is off and the mailbox has a greeting recorded, the Paging Message is dis-
abled. If the destination extension is unanswered, the caller can, however, optionally dial 2 to initiate
Park and Page.
Paging Message (page 249)
The Paging message is the prerecorded announcement used for Park and Page.
Screened Transfer (page 270)
Park and Page will not function for Screened Transfers (TRFs) when the Paging Message is off.
Unscreened Transfer (page 299)
Park and Page will not function for Unscreened Transfers. If the destination extension is unanswered, the
caller can, however, optionally dial 2 to initiate Park and Page
Programming
Step 1 Set the Park and Page String for each Subscriber Mailbox.
1.1 CUSTOMIZE: MAILBOX OPTIONS EDIT: SUBSCRIBER: [SUBSCRIBER] PARK/PAGING STRING (PAGE 437).
- This string should be FW*ext/P*10M.
✔
The default setting for this item is FW*ext/*10M (ext = subscriber’s extension number)
Step 2 Check the Combined Paging Programming
2.1 31-02-01: INTERNAL PAGING GROUP ASSIGNMENT - INTERNAL PAGING GROUP NUMBER.
- Assign the extension to one of the Internal Paging Groups used by Combined Paging (1-9).
✔ By default, extensions are not in an Internal Paging Group.
2.2 31-02-02: INTERNAL PAGING GROUP ASSIGNMENT - INTERNAL ALL CALL PAGING RECEIVING.
- Allow (1) All Call Internal Paging at the extensions that should be able to broadcast the
Park and Page announcement.
✔ By default, extensions do not broadcast All Call Internal Paging (0).
Step 3 Be sure Park and Page is enabled.
3.1 45-01-04: PARK AND PAGE
- Enter 1 to enable this option.
✔ By default, this option is enabled (Yes).
Step 4 Set the UX5000 orbit recall time.
4.1 ADJUST 24-02-04: TRANSFER RECALL TIME AS REQUIRED.
Compatibility Guidelines:
■ When using the UX Mail Administrator to enter dial strings, take care not to enter illegal characters
(such as dashes). Enter only those characters allowed by the option you are programming.