R&S ZNB - Page 1261

Command Reference
R&S
®
ZNB/ZNBT
1261User Manual 1173.9163.02 ─ 55
Parameters:
<pport1>,<pport2>... Physical VNA port numbers
Example: See SOURce<Ch>:GROup<Grp>:PPORt<PhyPort>:DPORt
Manual operation: See "Controls and Functions" on page 537
SOURce<Ch>:GROup<Grp>:PPORt<PhyPort>:DPORt <DestinationPort>
R&S ZNBT only!
In "Set" direction this command connects physical VNA port <PhyPort> to DUT
<Grp> port <DestinationPort>. The query returns the connected DUT port (if any).
Note
●
The related port group must have been created before using SOURce<Ch>:
GROup<Grp>:PPORts.
●
Neither physical VNA ports nor DUT ports may be connected more than once
Suffix:
<Ch>
.
Channel number
<Grp> Port group number
<PhyPort> Number of a physical VNA port in port group <Grp>.
Parameters:
<DestinationPort> Number of a port on the related DUT.
Must be smaller than the size of the DUT <Grp> (set using
SOURce<Ch>:GROup<Grp>:DPORt:COUNt).
SCPI Command Reference