R&S ZNB User Manual

Command Reference
R&S
®
ZNB/ZNBT
897User Manual 1173.9163.02 ─ 55
CALCulate:PARameter:DELete:ALL.................................................................................897
CALCulate:PARameter:DELete:MEMory...........................................................................897
CALCulate<Ch>:PARameter:CATalog?.............................................................................897
CALCulate<Ch>:PARameter:CATalog:SENDed?............................................................... 898
CALCulate<Ch>:PARameter:DEFine:SGRoup.................................................................. 898
CALCulate<Ch>:PARameter:DELete................................................................................899
CALCulate<Ch>:PARameter:DELete:CALL.......................................................................900
CALCulate<Ch>:PARameter:DELete:CMEMory................................................................ 900
CALCulate<Ch>:PARameter:DELete:SGRoup.................................................................. 900
CALCulate<Ch>:PARameter:MEASure............................................................................ 901
CALCulate<Ch>:PARameter:MEASure:SENDed............................................................... 902
CALCulate<Ch>:PARameter:SDEFine............................................................................. 902
CALCulate<Ch>:PARameter:SDEFine:SENDed................................................................905
CALCulate<Ch>:PARameter:SELect................................................................................905
CALCulate:PARameter:DELete:ALL
Deletes all traces in all channels of the active recall set, including the default trace
Trc1 in channel 1. The manual control screen shows "No Trace".
Example:
See CALCulate<Ch>:PARameter:DELete
Usage: Event
Manual operation: See "Delete Trace" on page 303
CALCulate:PARameter:DELete:MEMory
Deletes all memory traces in all channels.
Usage:
Event
Manual operation: See "Delete All Mem" on page 310
CALCulate<Ch>:PARameter:CATalog?
Returns the trace names and measurement parameters of all traces assigned to a par-
ticular channel.
The result is a string containing a comma-separated list of trace names and measure-
ment parameters, e.g. 'CH4TR1,S11,CH4TR2,S12'. The measurement parameters
are returned according to the naming convention of CALCulate<Ch>:PARameter:
SDEFine. The order of traces in the list reflects their creation time: The oldest trace is
the first, the newest trace is the last trace in the list.
Suffix:
<Ch>
.
Channel number. If unspecified the numeric suffix is set to 1.
SCPI Command Reference

R&S ZNB Specifications

General

Brand	R&S
Model	ZNB
Category	Measuring Instruments
Language	English