MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-24 SM
2301 Transfer Current Adjustment
Adjusts the current applied to the transfer belt during copying, depending on the side,
media type, and operation mode (normal or low speed).
001 1st Copy Side
002 Thick Paper
B234: [10~200 / * / 10 μA]
* B234/D101: 100
* B235/D102: 110
* B236/D103: 130
003 Transparencies
[10~200 / 140 / 1 μA]
004 Translucent Sheets
005 2nd Copy Side
B234: [10~200 / * / 10 μA]
* B234/D101: 100
* B235/D102: 110
* B236/D103: 130
006 Between Papers
[10~200 / 20 / 1 μA]
007 Postcard
[10~200 / 140 / 1 μA]
008 1st Copy Side (Low Speed)
009 Thick Paper (Low Speed)
[10~200 / * / 1 μA]
* B234/D101: 100
* B235/D102: 100
* B236/D103: 110
010 Transparencies (Low Speed)
[10~200 / 140 / 1 μA]
011 Translucent Sheets (Low Speed)
012 2nd Copy Side (Low Speed)
[10~200 / * / 1 μA]
* B234/D101: 100
* B235/D102: 100
* B236/D103: 110
013 Between Papers (Low Speed)
[10~200 / 20 / 1 μA]
014 Postcard (Low Speed)
[10~200 / 140 / 1 μA]
2506 Cleaning Interval-Multiple Copy
001 On / Off
Selects whether multiple jobs are stopped at regular intervals in order to 1) reverse the
drum to clean the cleaning blade edge, or 2) create an ID sensor pattern to correct
toner density control. This SP switches this feature on and off. SP2506 002 sets the
interval.
[0~1 / 1/1]
0: OFF, 1: ON
Use if the drum gets dirty or images get too pale or too dark during long copy jobs.
002 Interval
Selects the interval at which multi copy jobs are stopped for blade cleaning.
[1~100 / 30/ 1 min]
Reduce the value if a large amount of paper dust is causing black lines on the copy.
To Next Page
Loading...
