MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-58 SM
PM Alarm 5501
Sets the count level for the PM alarm.
[0~9999 / 0 / 1]
0: Alarm disabled
The PM alarm goes off when the print count reaches this value multiplied by 1,000.
Jam Alarm Japan Only 5504
Sets the alarm to sound for the specified jam level (document misfeeds are not
included). RSS use only
[0~3 / 3 / 1 step]
0:Zero (Off)
1:Low (2.5K jams)
2:Medium (3K jams)
3:High (6K jams)
Error Alarm 5505
Sets the error alarm level. Japan only DFU
[0~255 / 50 / 100 copies per step]
5507 Supply Alarm
001
Paper Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the paper supply.
DFU
0: Off, 1: On
0: No alarm.
1: Sets the alarm to sound for the specified number
transfer sheets for each paper size (A3, A4, B4, B5,
DLT, LG, LT, HLT)
002
Staple Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the stapler installed
in the finisher. DFU
0: Off, 1: On
0: No alarm
1: Alarm goes off for every 1K of staples used.
003
Toner Supply Alarm
(0:Off 1:On)
Switches the control call on/off for the toner end. DFU
0: Off, 1: On
If you select “1” the alarm will sound when the copier
detects toner end.
128 interval: Others
132 Interval: A3
133 Interval: A4
134 Interval: A5
141 Interval: B4
142 Interval: B5
160 Interval: DLT
164 Interval: LG
166 Interval: LT
172 Interval: HLT
The “Paper Supply Call Level: nn” SPs specify the
paper control call interval for the referenced paper
sizes. DFU
[00250 ~ 10000 / 1000 / 1 Step]
To Next Page
Loading...
