Ricoh B234 - Page 595

Main Service Program Mode Tables
SM 5-57 B234/B235/B236/D101/D102/D103
Service
Tables
Summer Time
Lets you set the machine to adjust its date and time automatically with the change to
Daylight Savings time in the spring and back to normal time in the fall. This SP lets you
set these items:
• Day and time to go forward automatically in April.
• Day and time to go back automatically in October.
• Set the length of time to go forward and back automatically.
The settings for 002 and 003 are done with 8-digit numbers:
Digits Meaning
1st, 2nd Month. 4: April, 10: October (for months 1 to 9, the first digit of 0
cannot be input, so the eight-digit setting for 002 or 003 becomes
a seven-digit setting)
3rd Day of the week. 0: Sunday, 1: Monday
4th
The number of the week for the day selected at the 3rd digit. If
“0”
is selected for “Sunday”, for example, and the selected Sunday is
the start of the 2nd week, then input a “2” for this digit.
5th, 6th The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
7th The number of hours to change the time. 1 hour: 1
5307
8th If the time change is not a whole number (1.5 hours for example),
digit 8 should be 3 (30 minutes).
001 Setting Enables/disables the settings for 002 and 003.
[0~1/1]
0: Disable
1: Enable
003 Rule Set (Start) The start of summer time.
004 Rule Set (End) The end of summer time.
Access Control DFU 5401
This SP stores the settings that limit uses access to SDK application data.
103 Default Document ACL
NOTE1: This is only available using
Windows/LDAP/Integration Server
Authentication.
NOTE2: This default will only apply to new
users. It will not affect existing users.
Assign default access privileges
of users to their own documents
on the Document Server.
0: Read only (default)
1: Edit
2: Edit/delete
3: Full control
200 SDK1 Unique ID
201 SDK1 Certification Method
210 SDK2 Unique ID
211 SDK2 Certification Method
220 SDK3 Unique ID
221 SDK3 Certification Method
"SDK" is the "Software
Development Kit". This data can
be converted from SAS (VAS)
when installed or uninstalled. DFU
User Code Count Clear 5404
Clears the counts for the user codes assigned by the key operator to restrict the
use of the machine. Press [Execute] to clear.