MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-56 SM
5227 Page Numbering (Bates Stamp)
220 Change Page No. Display
This SP code determines whether the page number adjustment display is on or off.
[0~1/0/1]
0: Display off
1: Display on
221 Allow Page No. Entry
This SP specifies the number of digits to display for the entry of the starting page
number.
[2~9/9/1]
222 Zero Surplus Setting
This setting determines whether page numbers are prefixed with excess zeros
when the number is smaller than the number of assigned digits. For example, with
this setting on and 3 digits have been specified, the number "3" appears as "003".
With this setting off, the number "3" will appear as a "3" without the zeros.
[0~1/0/1]
0: No excess zeros
1: Excess zeros displayed
5302 Set Time DFU
Sets the time clock for the local time. This setting is done at the factory before
delivery. The setting is GMT expressed in minutes.
[–1440~1440/1 min.]
JA: +540 (Tokyo)
NA: -300 (NY)
EU: +6- (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
Auto Off Function Release Setting 5305
This SP prevents the user from easily disabling the auto off timer. This is done to
conform with international Energy Star standards that specifically state that the
user shall not be able to easily switch off the auto off feature.
0: On (Auto Off cannot be released
1: Off (Auto Off can be released)
To Next Page
Loading...
