Main Service Program Mode Tables
SM 5-95 B234/B235/B236/D101/D102/D103
Service
Tables
6114 Finisher Free Run
001 Free Run 1 System free run. A4 LEF at 90 ppm, with simulated staple mode.
002 Free Run 2
Free run for durability testing. All motors and solenoids operate to
simulate full staple mode run for durability testing.
003 Free Run 3 Shipping free run. Simulates standby conditions during shipping.
004 Free Run 4
Shift free run. A4 LEF at 90 ppm with simulated output jogging with
the shift jogger unit mounted on the side of the finisher.
6116 Sheet Conversion (Thick Paper)
Divide the normal limit for stapling by this number to determine the staple limit
number for thick paper mode.
[1~3 / 3 / 1]
6119 Punch Function Enabled (Thick Paper)
Determines whether punch mode is enabled in thick paper mode.
[0~1 / 0 / 1]
0: Disabled
1: Enabled
6200 Adj Booklet Stapling Position
Use this SP to adjust the stapling position of the booklet stapler when paper is
stapled and folded in the Booklet Finisher B836.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 12" x 18" SEF
006 DLT
007 LG
008 LT SEF
009 Custom Size
[-3.0 to +3.0/0/0.2 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
Feed O ut
To Next Page
Loading...
