MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-94 SM
6104 Pre-Stack Adjustment
[-3 to +3/0/0.1]
001 A4 LEF
002 B5 LEF
003 LT LEF
004 Other
6105 Adj Leading Edge Stopper Pressure
001 A4 LEF [-5.0~+10.0/0/0.1]
002 B5 LEF [-5.0~+2.0/0/0.11]
003 LT LEF [-5.0~+10.0/0/0.1]
004 Other [-5.0~+10.0/0/0.1]
6106 Staple Jogging Repeat Settings
Allows you to increase by 1 the number of times the stack is jogged on the stapling
tray.
[DEFAULT] +1
6107 Staple Tray Jog Off/On
Allows you to switch jogging on the stapling tray off and on for the paper sizes listed
below.
001 A3 SEF 0:On 1:Off
002 B4 SEF 0:On 1:Off
003 A4 SEF 0:On 1:Off
004 A4 LEF 0:On 1:Off
005 A5 SEF 0:On 1:Off
006 B5 SEF 0:On 1:Off
007 B5 LEF 0:On 1:Off
008 DLT SEF 0:On 1:Off
009 LG SEF 0:On 1:Off
010 LT SEF 0:On 1:Off
011 LT LEF 0:On 1:Off
012 HLT SEF 0:On 1:Off
013 Other 0:On 1:Off
The default for each paper size is 0 (On)
6112 Finisher Input Check
Displays the signals received from sensors and switches of the finisher. (5.4.3
6113 Finisher Output Check
Turn on the electrical components of the finisher individually for test purposes.
(5.5.3)
To Next Page
Loading...
