Main Service Program Mode Tables
SM 5-93 B234/B235/B236/D101/D102/D103
Service
Tables
6102 Fine Adjust Stapler Jogger Fences
Use this SP code to adjust the positions of the jogger fences when the pages are
aligned (jogged) horizontally in the stapling tray for corner stapling in the Finisher
B830. These jogger fences close in on the sides of the stack on the paper tray.
These side fences move in and out perpendicular to the direction of paper feed.
• The higher the setting, the narrower the jogger span and the smaller the gaps
between the fences and the edges of the paper. Stacking is tighter.
• The lower the setting, the wider the jogger span and the wider the gaps between
the fences and the edges of the paper. Stacking is not as precise.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT
008 LG
009 LT SEF
010 LT LEF
011 Custom Size
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
[-2.0 to +1.5 / 0 / 0.5 mm]
6103 Adjust Output Jog Position
Use this SP code to adjust the positions of the jogger fences when the pages are
aligned (jogged) horizontally in the stapling tray for stapling in the Booklet Finisher
B836. The jogger fences close in on the sides of the stack on the paper tray. These
side fences move in and out perpendicular to the direction of paper feed.
[-3 to +3 / 0 / 0.1 mm]
• The higher the setting, the narrower the jogger span and the smaller the gaps
between the fences and the edges of the paper. Stacking is tighter.
• The lower the setting, the wider the jogger span and the wider the gaps between
the fences and the edges of the paper. Stacking is not as tight.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT
008 LG
009 LT SEF
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
To Next Page
Loading...
