Main Service Program Mode Tables
SM 5-99 B234/B235/B236/D101/D102/D103
Service
Tables
6506 Adj Jog: Binding 1 Ring Binder D392
1 A4 LEF
2 LT LEF
Adjusts the stop position of the front jog fence. If the correct number is
not entered, the stack will not be jogged correctly before binding.
[-2 to +2/0/0.1 mm]
This SP must be adjusted after replacement of one or more of the
following items:
• Ring binder main board
• Binder unit control board
• Pre-bind jogger unit
The correct value to be entered for the adjustment is written in the
second line of the label. This label is attached to the front cover of the
pre-bind jogger unit.
Note: The value must be divided by "10". For example, "-7" is actually "-
0.7 mm)
6507 Adj Jog: Binding 2 Ring Binder D392
1 A4 LEF
2 LT LEF
Shifts the operating position of the rear jog fence. If the correct number
is not entered, the stack will not be jogged correctly before binding.
[-2 to +2/0/0.1 mm]
This SP must be adjusted after replacement of one or more of the
following items:
• Ring binder main board
• Binder unit control board
• Pre-bind jogger unit
The correct value to be entered for the adjustment is written in the third
line of the label. This label is attached to the front cover of the pre-bind
jogger unit.
Note: The value must be divided by "10". For example, "-3" is actually "-
0.3 mm")
To Next Page
Loading...
