MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-162 SM
6710
Staple Jog Adjust Across Feed
Super User Only
User SP
Use this SP code to adjust the positions of the jogger fences when the pages are
aligned (jogged) horizontally in the stapling tray for corner stapling in the Finisher
B830. These jogger fences close in on the sides of the stack on the paper tray. These
side fences move in and out perpendicular to the direction of paper feed.
• The higher the setting, the narrower the jogger span and the smaller the gaps
between the fences and the edges of the paper. Stacking is tighter.
• The lower the setting, the wider the jogger span and the wider the gaps between
the fences and the edges of the paper. Stacking is not as precise.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 Custom Size
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
[-2 to +1.5 / 0 / 0.5 mm]
6715
Jogger Adjustment Across Feed
Super User Only
User SP
Use this SP code to adjust the positions of the jogger fences when the pages are
aligned (jogged) horizontally in the stapling tray for stapling in the 3K Finisher B830.
The jogger fences close in on the sides of the stack on the paper tray. These side
fences move in and out perpendicular to the direction of paper feed.
[-3 to +3 / 0 / 0.1 mm]
• The higher the setting, the narrower the jogger span and the smaller the gaps
between the fences and the edges of the paper. Stacking is tighter.
• The lower the setting, the wider the jogger span and the wider the gaps between
the fences and the edges of the paper. Stacking is not as tight.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 A5 SEF
006 A5 LEF
007 B5 SEF
008 B5 LEF
009 DLT
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
010 LG
011 LT SEF
012 LT LEF
013 HLT SEF
014 HLT LEF
015 Custom Size
To Next Page
Loading...
