Ricoh B234 - Page 701

Main Service Program Mode Tables
SM 5-163 B234/B235/B236/D101/D102/D103
Service
Tables
6720
Staple Jog Adjust With Feed
Super User Only
User SP
Use this SP code to adjust the position of the jogger fence when the pages are
aligned (jogged) vertically in the stapling tray for corner stapling in the Finisher B830.
The jogger fences close in on the sides of the stack on the paper tray. These side
fences move in and out perpendicular to the direction of paper feed.
[-5 to +10 / 0 / 0.1 mm]
• The higher the setting, the narrower the jogger span and the smaller the gaps
between the fences and the edges of the paper. Stacking is tighter.
• The lower the setting, the wider the jogger span and the wider the gaps between
the fences and the edges of the paper. Stacking is not as precise.
001 A4 LEF
002 B5 LEF
003 LT LEF
004 Custom Size
The settings are done for each paper size.
SEF denotes "Short Edge Feed".
LEF denotes "Long Edge Feed".
6730
Adjust Booklet Stapling Position
User SP
Use this SP to adjust the stapling position of the booklet stapler when paper is
stapled and folded in the Booklet Finisher B836.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 12" x 18" SEF
006 DLT SEF
007 LG SEF
008 LT SEF
009 Custom Size
[-3.0 to +3.0/0/0.2 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
Feed O ut
6735
Adjust Booklet Fold Position
User SP
This SP corrects the folding position when paper is stapled and folded in the
Booklet Finisher B836.
001 A3 SEF
002 B4 SEF
003 A4 SEf
004 B5 SEF
005 DLT SEF
006 LG SEF
007 LT SEF
008 12"x18"
009 Custom Size
[-3~+3/0/0.2 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
Feed O ut