MAIN SERVICE PROGRAM MODE TABLES
B234/B235/B236/D101/D102/D103 5-164 SM
6740
Fine Adjust Booklet: Adjust Across Feed
Super User Only
User SP
This SP adjusts the distance between the jogger fences and the sides of the stack
on the finisher stapling tray in the Booklet Finisher B836. The adjustment is done
perpendicular to the direction of paper feed.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 12"x18" SEF
006 DLT SEF
007 LG SEF
008 LT SEF
009 Custom Size
[-1.5 to +1.5/0/0.5 mm]
+ Value: Increases distance between jogger fences and the sides
of the stack.
- Value: Decreases the distance between the jogger fences and
the sides of the stack.
6745
Book Fold Repetitions
User SP
This SP sets the number of times the folding rollers are driven forward and
reverse to sharpen the crease of a folded booklet before it exits the folding unit of
the Booklet Finisher B836. When set at the default (0):
• The folding blade pushes the center of the stack into the nip of the folding roller.
• The folding rollers rotated counter-clockwise to crease the booklet, reverse
clock-wise, then rotate counter-clockwise again crease the booklet fold twice
before feeding to the folding unit exit rollers.
[0~6/0/1 Step]
Each number represents the number 1 cycle of forward/reverse feed between the
rollers.
0: 2 4: 20
1: 5 5: 25
2: 10 6: 30
3: 15
To Next Page
Loading...
