Main Service Program Mode Tables
SM 5-165 B234/B235/B236/D101/D102/D103
Service
Tables
6755
Fine Adjust Z-Fold 1
Super User Only
User SP
Use this SP code to adjust the position of the first fold [A]. This adjustment decreases
or increases the distance (A) between the leading edge [B] and the crease of the 2nd
fold [C].
[-2 to +4/0/ 0.2 mm]
001 1st Fold: A3 SEF
002 1st Fold: B4 SEF
003 1st Fold: A4 SEF
004 1st Fold: DLT SEF
005 1st Fold: LG SEF
006 1st Fold: LT SEF
007 1st Fold: 12" x 18"
008 1st Fold: Custom Size
A
L1
[A ]
[B ]
[C ]
[D ]
6760
Fine Adjust Z-Fold 2
Super User Only
User SP
Use this SP code to adjust the position of the 2nd fold [C] to decrease or increase the
length (L1) of the sheet between the trailing edge [D] and the 2nd fold.
[-2 to +2/0/ 0.2 mm]
001 2nd Fold: A3 SEF
002 2nd Fold: B4 SEF
003 2nd Fold: A4 SEF
004 2nd Fold: DLT SEF
005 2nd Fold: LG SEF
006 2nd Fold: LT SEF
007 2nd Fold: 12" x 18"
008 2nd Fold: Custom Size
A
L1
[A ]
[B ]
[C ]
[D ]
To Next Page
Loading...
