Trimble S - Page 205

Chapter 5
Maintenance and Repair
P/N 57150002, Revision 5.0 5 - 19 Trimble S, VX, SPS & RTS Service Manual
F
7 Update MSB board
version in the
instrument.
See page 6-28. Note – Run the
Hardware Angle,
MSB board
replacement every
time a MSB board is
replaced, even after
replacing a ver. 6
with a ver. 6.
8 Initialize IPC
instrument data.
See page 6-7.
9 Run Servo & angle
calibration.
See page 6-25.
Item Performance Action Results Notes