Chapter 5
Maintenance and Repair
Trimble S, VX, SPS & RTS Service Manual5 - 126 P/N 57150002, Revision 5.0
F
8 Perform Trunnion axis
correction
See page 6-48.
9 Run EDM offset
determination.
See page 6-82 and
page 6-120.
10 Calibrate video
camera.
See page 6-166.
Important: Tilt sensor offset, HA/VA
collimation and Trunnion axis have to be
determined before Camera calibration!
Item Performance Action Result Notes
To Next Page
Loading...