Chapter 5
Maintenance and Repair
Trimble S, VX, SPS & RTS Service Manual5 - 150 P/N 57150002, Revision 5.0
F
Transceiver board Reference signal, Receiver fibre
to APD maximum
PASS, All steps in EDM
Greywedge motor PASS, EDM, Check motors &
Check Reference fibre/signals
Switch motor PASS, EDM, Check motors &
Check Reference fibre/signals
EDM frame Fibre adjustments / Reference
signal, Receiver fibre to APD
maximum
PASS, All steps in EDM
Tracker unit, Servo Focus & Tele-
scope
OTA board PASS, Tracker function,
tracker collimation
OTC board PASS, Tracker function,
tracker collimation, firmware
update
Tracklight Tracklight PASS, Tracklight
SFC board PASS, Servo focus, firmware
update
Servo focus drive Servo focus PASS, Servo focus
Reticle Reticle PASS, Reticle
Reticle illumination PASS, Reticle illumination
Video camera
Video front lens, complete PASS, Camera focus, Camera
calibration
Digital Video-camera assembly PASS, Camera focus, Camera
calibration
Board / module replaced Adjustment Check / test
To Next Page
Loading...