Trimble S - Page 9

P/N 57150002, Revision 5.0 - IX Trimble S, VX, SPS & RTS Service Manual
F
5.0 February
2010
Changes
• Trimble S3 Total Station Servo/Autolock/Robotic service information
added
• DR PLUS EDM service information added
• DR EDM service information added
• TCU Attachment with USB added, see page 6-14
• HTU column added to model matrix, see page 2-14
• Information about measuring through glass added, see page 1-28
• New PASS function, TCXO Frequency calibration instructions, see page
6-80 and see page 6-119
• New PASS function, Logging software instructions, see page 4-10
• Updated Service interval function in PASS, new function to also read out
service interval inform ation from the instrument, see page 6-200
• Updated PASS function, software to install configuration numbers to the
instrument, see page 6-201
• Renamed service part 59010019 Horizontal Turning Unit 1” to
Horizontal Turning Unit High Angle Accuracy, see page 3-39
6.0 June 2011
Changes
• Trimble S3 Total Station Servo/Autolock models with face 2 panel added
• Trimble RTS633 DR PLUS model added
• Trimble SPS620, 720 DR and SPS630, 730, 930 DR PLUS models added
• Trimble S8 High Precision with camera, model added.
Version Date Changes