7. System Setup
7.8 Savi ng the setup
General
In this procedure, you w ill save all system setup parameters to non-volatile memor y.
Prerequisite
• Ensure that y ou are fam iliar with the Save All function. For details on this menu, please refer to chapter "Save All", page 85.
Save all system setup parameters
Use the following steps to save all system setup parameters:
1. Select Save All from the Setup menu.
2. Wait a few seconds. When the parameters are save d you are returned to the Se tup menu.
R5905948 EVENT MASTER DEVICES 17/07/2017
227
To Next Page
Loading...
