Barco S3 User Manual

12. Controller Operation
12.3 How to power down the EC-200
General
Because repeated hard power cy cling over time may lead to corruption of the solid-state drive (SSD), all versions of the EC-200
Event Master Toolset, version 4.0.29 026 or higher, have a power-off s oft button on the touchscreen.
Description
The pow er-off soft button is above the sav e button on the Menu navigation bar. See image 12-2 for the location of the power-off soft
button.
Image 12-2
Soft-Off button on the EC-2 0 0 GUI
To shut down the E C-200 console …
1. Click on the pow er-off soft button
in the Me nu navigation bar.
2. Select Po werOff in the confirmation window.
The user must power cycle the main (hardware) s witch to power on the console. There is no soft PowerO n button.
For more information on the powe r-off soft button and SSD recovery, see InfoT-1325: SSD Recovery on the EC-200 Controller
on the Technical Downloads tab of the EC-200 Large event co ntroller web page (URL: h
ttps://www.barco.com/en/Products/Image-
processing/P resentation-switchers/Large-event-controller.aspx#!downloads).
326
R5905948 EVENT MASTER DEVICES 17/07/2017

Barco S3 Specifications

General

Brand	Barco
Model	S3
Category	Computer Hardware
Language	English