13. E2 Maintenance
13.8 EMI Filter
Image 13-15
Concerned parts
R767272K E MI Filter
Necessary tools
None.
How to remove the EMI Filter
1. Remove the EMI filter by first pulling gently the right side out and then untucking the left side from behind the key features.
Image 13-16
How t o install the EMI Filter
To install the EMI F ilter follow the same procedure in the reverse order.
Begin by tucking in the left side behind the key features. To get the right hand side in position, use fingers in
the center to pull the filter forward, wh ile pushing the right h and side beh ind the key feature in the rack ears.
Then push the entire filter into position.
The filter will push against the four flat sections on the front of the fan trays.
Image 13-17
R5905948 EVENT MASTER DEVICES 17/07/2017 361
To Next Page
Loading...
Need help?
General
