5. Front Panel Menu orientation
5.12 System menu > Lock front panel
General
When the E vent Master unit’s front panel is locked, button presses have no effect. In the locked mode:
• All b utton presses (including Power ON/OFF button) and all turns of the ADJUST knob are ignored.
• All Ethernet communications commands function normally.
How to enable and disable the front-panel lock?
1. On the System men u, scroll to Lock Front Panel and press SEL. Th e front p anel is locked, and the following mes sage appears:
Image 5-29
Front Panel Locked Message
2. To disable the front panel lock, press and hold the SEL and ESC buttons simultaneously for 3 seconds. Whe n the panel is
unlocked, the display screen display s the Status menu.
R5905948 EVENT MASTER DEVICES 17/07/2017
81
To Next Page
Loading...
Need help?
General
