Barco S3 User Manual

B. Remote Control Protocol
B.1 Event Master series processor ASCII remote control
General
The user can remotely control the Event Master series processor v ia a telnet connection to the unit’s IP address.
How to access the Event Master series processor remotely
To access the Event Master series processor remote commands, use the following procedure:
1. In a command prompt window, type a telnet command in the following format:
> telnet nnn.nnn.nnn.nnn 9878
where the n’s represent the unit I P addres s and 9878 is the por t.
2. Press Enter
The command prompt appears.
3. At the c omm and prompt, type a sp ecific Event Master series pr ocessor remote control command and press Enter.
ASCII remote commands
This section lists the Event Master series processor remote commands, s orted by name.
ATRN
• Description: Performs an Auto Transition on the currently active destinations. The currently selected Effect type, rate and edge
width will be used to transition pr eview to program.
• Command Format: ATRN <transTim e>
• Parameters:
<transTim e> (optional)
Used to specify a transition time (duration of the transition) in frames. Value ranges from 0 to 1999. A 0 specify a cut transition.
Any non-zero value (within range) will override the transition time in the controlle
r. If this argument is not specified, the current
transition time known by the controller will be used.
• Examples:
> ATRN 200
(Tr ansition Preview to Program on currently active destinations in 200 frames)
> ATRN 0
(Tr ansition P review to Program im mediately. T his is a C UT.)
> ATRN
(Tr ansition Preview to P rogram using the transition time set in the controller)
• Query Format: N/A
• Query Response: N /A
PRESET
• Description: Preset Settings. For parameter details, see below.
• Command Format: PR ES ET
• Parameters:
-s (save preset, 1-1000)
-r (recall preset, 1- 1000)
-a (recall preset a nd auto transition, 1-1000)
• Examples:
> PRESET -s 1
(Save currently se lected destinations to preset 1)
> PRESET -r 10
(Recall preset 10)
PRESET -a 10
(Recall preset 10 and auto transition)
• Query Format: N/A
• Query Response: N /A
510
R5905948 EVENT MASTER DEVICES 17/07/2017

Barco S3 Specifications

General

Brand	Barco
Model	S3
Category	Computer Hardware
Language	English