Barco S3 User Manual

12. Controller Operation
12.7 What are Layer executers?
General
These are the buttons to the right of the Layer Buttons, the function of them is described in context above and in detail below.
Freeze PGM
Button F reezes program of selected Layer(s) of the s elected destination(s), blue L ED when active.
Press again to release freeze.
Freeze PVW
Button freezes preview of selected Layer(s) of the selected destination, blue LED w hen active.
Press again to release freeze.
Arm
Button arms effects on selected layers in a ll selected destinations.
Indication of armed FX on PGM , red LED.
Indication of armed FX on PVW, green LED.
Match
Match the selected layer in Preview to its corresponding layer in P rogram.
Button matches the function of Match P rogram in the GUI.
Blinksredwhenpressed.
Can be used across multiple layers and de stinations.
Lay e r Trans
Transitions Selected Layers into Program, based on # of frames set for the layer in the G UI.
Button matches the function of Trans in the GUI below the workspace.
Lay e r C ut
Cut selected layer into Program.
Button matches the function of CU T in the G UI below the workspace.
330
R5905948 EVENT MASTER DEVICES 17/07/2017

Barco S3 Specifications

General

Brand	Barco
Model	S3
Category	Computer Hardware
Language	English