5. Front Panel Menu orientation
5.16 Save All
General
Save All on the Setup menu saves you r custom configuration parameters in non-volatile memory.
If you save the s ystem state, these parameters are restored the next time you power up the E vent Master unit. If you do not use this
function, your custom settings are not restored during the next system power up s equence.
Saving all modifie d settings
1. Select Save All from the Setup menu.
The following mes sage appears:
Image 5-32
“Saving all” message
2. Wait few seconds ...
Parameters are saved in non-volatile memory and you are returned to the Setup menu.
R5905948 EVENT MASTER DEVICES 17/07/2017
85
To Next Page
Loading...
