iPECS UCP - Page 156

iPECS UCP
Feature Description and Operation Manual Issue 1.3
144
menu, press nine.”) is played. This process is repeated until the last saved message is
played and the "No Message” prompt (“No Messages”) is played.
In addition to the options indicated in the prompt, you can record a memo, which is
attached to the current voice mail by dialing the digit 7. The current voice mail and memo
can then be forwarded to other iPECS users.
When you dial 9 in response to the “Number of Messages” prompt or during or at the end of
a message, the “VM long Options” prompt is played.
Operation
iPECS IP & LDP Phones
[TRANS/PGM] + {FLEX} + VM group + Mail-box (station) number + [HOLD/SAVE]
To assign a {VMAILBOX} Flex button
1. Lift the handset or press the [SPEAKER] button.
To retrieve Voice Mail locally
2. Press [MESSAGE/CALLBACK] button. The message contents summary is
shown as below.
ST CL VS VM FS MS
001 001 005 006 001 004
3. Dial digit “3” to select the integrated VM Messages to receive the “Mailbox&
Password” prompts sequentially.
4. Dial the Mailbox and corresponding password to receive the “Number of Messages”
prompt.
5. Dial desired option code.
6. At completion of session, hang-up to return to idle.
Or,
1. Lift the handset or press the [SPEAKER] button.
2. Press {VMAILBOX} button.
3. Dial the Mailbox password to receive the “Number of Messages” prompt.
4. Dial desired option code.
5. At completion of session, hang-up to return to idle.
1. During or after the New or Old Message option prompt, dial “7”.
To attach a memo to the current voice message
2. At the beep, record the memo.
3. Dial “*” to stop recording and store the memo.
4. During or after the New/Old option prompt, dial “4” to forward the message and
memo.
1. Dial ‘#’ while the date/time prompt is played.
To skip the date/time prompt while hearing
2. System will stop playing the prompt and it will provide the message.
1. Dial ‘0’ while the message is played.
To hear the date/time prompt while hearing