iPECS UCP - Page 273

iPECS UCP
Feature Description and Operation Manual Issue 1.3
261
2. Dial “41”, the code for setting the Wake-up Alarm.
3. Enter the Wake-up alarm index number, “1 to 5”.
4. Dial the desired 2-digit hour (24-hour mode), then 2-digit minute for alerting.
5. Enter Repeating type, “1” to “4”.
6. For the one-time alarm (repeating type 1), enter the date for the alarm as two (2)
digits for year, month and day of the month.
7. Press the [HOLD/SAVE] button.
1. Press the [TRANS/PGM] button.
To erase a Wake-Up alarm
2. Dial “42”.
3. Enter Wake-Up alarm index number,“1” to “5”.
4. Press the [HOLD/SAVE] button.
1. Lift the handset or press the [SPEAKER] button.
To stop the alarm notification
SLT
1. Lift the handset.
To register a Wake-Up alarm
2. Dial “561”, the SLT Programming code, confirmation tone is heard.
3. Dial “41”, the set Wake-Up code.
4. Enter the Wake-up alarm index number, “1 to 5”.
5. Dial the 2-digit hour and 2-digit minute for alerting.
6. Enter Repeating type, “1” to “4”.
7. For the one-time alarm (repeating type 1), enter the date for the alarm as two (2)
digits for year, month and day of the month.
8. Hook-flash, conformation tone is provided.
1. Lift the handset.
To stop the alarm notification
1. Lift the handset.
To erase a Wake-Up alarm
2. Dial “561”, the SLT Programming code, confirmation tone is heard.
3. Dial “42”, the erase Wake-up code.
4. Enter Wake-Up alarm index number, “1” to “5”.
5. Hook-flash, a conformation tone is provided.
Conditions
1. When registering or erasing an alarm, iPECS IP and LDP phones can use the
[VOL UP]/[VOL DOWN] buttons to scroll between the Wake-up alarms and “#”
can be used to scroll through the repeating types.
2. The iPECS IP and LDP Phones will display an asterisk near the time to indicate a
Wake-Up alarm is set for the current day.
3. If you have all five Wake-Up alarms set, the Attendant cannot set a Wake-Up
alarm for you. When the Attendant sets an alarm, it is assigned to the lowest