To Next Page

To Previous Page

3 VMA Mode

3.7 Power Stat CCDF Measurement

–

MEASured

–

GAUSsian

–

REFerence

Remote

Command

:CALCulate:PSTatistic:MARKer[1]|2|…|12:TRACe?

Example

:CALC:PST:MARK3:TRAC MEAS

:CALC:PST:MARK:TRACE?

Preset

MEASured

State Saved Yes

Range

MEASured|GAUSsian|REFerence

Marker Settings Diagram

Lets you configure the Marker system using a visual utility. This is the same as

"Marker Settings Diagram" on page 1138 in Settings.

3.7.8 Meas Setup

Contains functions for setting up the measurement parameters and also contains

functions for setting up parameters global to all measurements in the mode.

3.7.8.1 Settings

Contains frequently used functions to which you will want the fastest access.

Counts

Sets the accumulated number of sampling points for data acquisition. The range is

1.000 kpt (k point) to 2.00000 Gpt (G point) with 1 kpt resolution.

Remote Command

[:SENSe]:PSTatistic:COUNts <integer>

[:SENSe]:PSTatistic:COUNts?

Example

:PST:COUN 5001

:PST:COUN?

Couplings Coupled to "Meas Cycles" on page 1141, by:

Counts = Meas Cycles * SamplingFrequency * "Meas Interval" on page 1141

Preset 10000000

Vector Modulation Analyzer Mode User's &Programmer's Reference 1140

Keysight x-series Programmer's Reference

Other manuals for Keysight x-series