3 VMA Mode
3.1 Digital Demod Measurement
Format name Description
I-Q Real part of data is shown on horizontal axis, imaginary part is shown on vertical axis, Independent
variable (X axis) is normal to display
Constellation Same as I-Q, but for data with symbols defined, only the symbol points are shown as dots with no
connecting lines
Real (I) Real part of data is shown on a linear Y axis
Imaginary (Q) Imaginary part of data is shown on linear Y axis
I-Eye Real part of data is shown with X axis segmented (generally into 2 symbol segments) and each
segment is overlaid to show signal crossings at symbol boundaries
Q-Eye Same as I-eye but imaginary part of data is shown
Example
:DISP:DDEM:WIND:DATA RTIM
Sets the first window data to FSK Ref Time
:DISP:DDEM:WIND:FORM CONS
Selects Constellation as the first window data format
FSK Meas Spectrum
Available only when the demodulation format is any FSK type.
FSK Meas Spectrum is the frequency spectrum of the FSK Meas Time trace data.
The demodulator produces the spectrum by windowing and FFT the FSK measured
data. If the measured filter is selected, the spectrum represents the signal after
filtering.
Example
:DISP:DDEM:WIND:DATA MSP
Sets the first window data to FSK Meas Spectrum
FSK Ref Spectrum
Available only when the demodulation format is any FSK type.
FSK Ref Spectrum is the frequency spectrum of the FSK Ref Time trace data. The
demodulator produces the spectrum by windowing and FFT the FSK reference data.
If the reference filter is selected, the spectrum represents the signal after filtering.
Example
:DISP:DDEM:WIND:DATA RSP
Sets the first window data to FSK Ref Spectrum
ASK Meas Time
Available only when the demodulation format is any ASK type.
Vector Modulation Analyzer Mode User's &Programmer's Reference 218
To Next Page
Loading...
Need help?
General
