Keysight x-series Programmer's Reference

7 Save/Recall/Print
7.3 Save
MeasResult
1
MeasResult
2
MeasResult
3
MeasResult
4
MeasResult
5
MeasResult
6
1 -78.28497 -80.93996 -91.00485 -90.56063 -76.33968
7.3.18 SEM Meas Results File Contents
SEM Meas Results Files are CSV files, with a .csv extension. Each file contains sets
of measurement results, preceded by a header section.
The header section items are as follows. They span columns A and B, unless
otherwise stated:
–
File ID string, which is MeasResult
–
Mode ID: Measurement ID, for example, SA:SEM
–
Firmware rev and model number
–
Option string
–
Automatic Trigger Time
–
Automatic Trigger Time State
–
Center Frequency
–
ChanIntegBW
–
ChannelDetector
–
ChannelDetectorState
–
ChanPwrRefAuto
–
ChanResBW
–
ChanResBWAuto
–
ChanSpan
–
ChanSweepTime
–
ChanSweepTimeAuto
–
ChanSweepTypeAuto
–
ChanVbwRbwRatio
2384 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)