Keysight x-series - 10.8 Binary Read Fast Power Measurement (Remote Command Only)

10 Hardware-Accelerated Fast Power Measurement (Remote Command Only)
10.8 Binary Read Fast Power Measurement (Remote Command Only)
10.8 Binary Read Fast Power Measurement (Remote Command
Only)
Shorthand for :INIT immediately followed by :FETC?. The returned results are in
binary format.
Remote
Command
:CALCulate:FPOWer:POWer[1,2,…,999]:READ?
:CALCulate:FPOWer:POWer[1,2,…,999]:READ1?
Example
:CALC:FPOW:POW1:READ?
:CALC:FPOW:POW1:READ1?
Notes Option FP2 is required
Returns m 4-byte floating point binary values (Little-Endian), where m corresponds to the number of
bandwidths defined
2648 Vector Modulation Analyzer Mode User's &Programmer's Reference