Keysight x-series Programmer's Reference

Table Of Contents
Vector Modulation Analyzer ModeUser's &Programmer's Reference 1
Table Of Contents 3
1 Documentation Roadmap 84
1.1 Products Covered by this Document 85
1.2 Additional Documentation 86
2 User Interface 88
2.1 Screen Tabs 89
2.1.1 Mode/Meas/View Dialog 90
2.1.1.1 Mode 91
2.1.1.2 Application Mode Remote Commands 94
Application Mode Catalog Query (Remote Command Only) 94
Current Application Model (Remote Command Only) 95
Current Application Revision (Remote Command Only) 95
Current Application Options (Remote Command Only) 96
Application Catalog Number of Entries (Remote Command Only) 96
Application Catalog Model Numbers (Remote Command Only) 96
Application Catalog Revision (Remote Command Only) 97
Application Catalog Options (Remote Command Only) 97
ESA SA compatibility command (Remote Command only) 97
GSM Mode compatibility command (Remote Command only) 98
SA compatibility command for EMC (Remote Command only) 98
Receiver compatibility command for EMC (Remote Command only) 98
APD compatibility command for EMC(Remote Command only) 98
IF Mode compatibility command for EMC (Remote Command only) 99
2.1.1.3 Measurement 99
2.1.1.4 View 99
2.1.1.5 Sequencer 101
2.1.1.6 Screen Name 104
2.1.1.7 Delete This Screen 105
2.1.1.8 Delete All But This Screen 105
2.1.1.9 89600 VSA 106
2.1.2 Add Screen 107
2.2 Meas Bar 109
2.3 Measurement Display 113
X-Series Signal Analyzers
Vector Modulation Analyzer Mode User's &Programmer's Reference
3

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)