Keysight x-series Programmer's Reference

3 VMA Mode
3.8 ACP Measurement
Example
:UNIT:ACP:POW:PSD DBMMHZ
:UNIT:ACP:POW:PSD?
Dependencies Enabled when "Measurement Type" on page 1330 is PSD Reference
Couplings When the PSD unit is changed, the PSD reference result of :MEAS|READ|FETCH:ACP[n]? is also
changed by the PSD unit basis (in either dBm/Hz or dBm/MHz)
Preset
DBMHZ
State Saved Saved in instrument state
Range dBm/Hz | dBm/MHz
3.8.13.3 Advanced
Contains controls for setting advanced functions of the instrument.
This tab does not appear in the following instruments:
–
EXM
–
VXT model M9420A
Phase Noise Opt
Selects the LO (local oscillator) phase noise behavior for various operating
conditions.
Remote Command
[:SENSe]:ACPower:FREQuency:SYNThesis[:STATe] 1 | … | 5
For the meaning of each numeric option value, see "Parameter Options, Installed Options, Auto Rules
& Ranges" on page 1340 below
[:SENSe]:ACPower:FREQuency:SYNThesis[:STATe]?
Example
:ACP:FREQ:SYNT 1
:ACP:FREQ:SYNT?
Dependencies Does not appear in all models. For models that do not display this control, the SCPI command is
accepted for compatibility (although no action is taken)
Not available in VXT models M9410A/11A/15A
Preset Because this function is in Auto after preset, the state of this function after Preset will be automatically
calculated
State Saved Saved in instrument state
Range See "Ranges" on page 1344 below
Auto Function
Remote
Command
[:SENSe]:ACPower:FREQuency:SYNThesis:AUTO[:STATe] OFF | ON | 0 | 1
[:SENSe]:ACPower:FREQuency:SYNThesis:AUTO[:STATe]?
1339 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)