Keysight x-series Programmer's Reference

3 VMA Mode
3.2 Custom OFDM Measurement
Remote
Command
[:SENSe]:OFDM:MCHannel:IPADdress1|2:LOCKed OFF | ON | 0 | 1
[:SENSe]:OFDM:MCHannel:IPADdress1|2:LOCKed?
Example
:OFDM:MCH:IPAD1:LOCK 1
:OFDM:MCH:IPAD1:LOCK?
Preset 0
State Saved Yes
Backwards
Compatibility
SCPI
[:SENSe]:OFDM:MIMO:IPADdress1|2:LOCKed
Channel Configuration Information (Remote Query only)
Returns channel configuration information.
Remote Command
[:SENSe]:OFDM:MCHannel:CHANnel:INFO?
Example
:OFDM:MCH:CHAN:INFO?
Backwards Compatibility
SCPI
[:SENSe]:OFDM:MIMO:CHANnel:INFO
3.2.9 Sweep
Accesses controls to configure and control the acquisition of data, and the X-axis
parameters of the instrument.
Depending on the selected mode and measurement, these controls might include:
Sweep Time, Continuous/Single, Pause/Resume, X Scale and Number of Points.
3.2.9.1 Sweep/Control
Accesses controls that let you operate the sweep and control functions of the
instrument, such as Sweep Time and Continuous/Single.
Sweep/Measure
Lets you toggle between Continuous and Single sweep or measurement operation.
The single/continuous state is Meas Global, so the setting affects all measurements.
The front-panel key Single/Cont performs exactly the same function
See "More Information" on page 548
Remote
:INITiate:CONTinuous OFF | ON | 0 | 1
547 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)