Keysight x-series Programmer's Reference

7 Save/Recall/Print
7.3 Save
Scale/Div 2
Trigger Holdoff 0.1
Trigger Holdoff State FALSE
TriggerSource Free
MeasResult1 MeasResult2 MeasResult3 MeasResult4
-73.0651058869747 36.9712197125257 36.7879441171442
36.9712197125257 36.8850431211499 36.7032368203129
7.3.20 TXP Meas Results File Contents
A TXP Meas Results File contains measurement results with the following header
information:
–
File ID string, which is “MeasResult”
–
Measurement ID following Mode ID, which is “SA:TXP” for example
–
Firmware rev and model number
–
Option string
–
Center Frequency
–
TXP_InfoBw
–
TXP_Used_CaptureTime
The header data is followed by a line containing entries "MeasResult1" to
"MeasResult4", which flags the start of the measurement results. Each line of
Measurement Results consists of four comma separated-values, from the
MeasResult1 value to the MeasResult4 value.
MeasResult1 contains the same results as MEAS/READ/FETCh:TXPower|BPOWer1;
MeasResult2, MEAS/READ/FETCh:TXPower|BPOWer2; and so on.
The exported file has .csv extension. A typical Meas Results file, when imported into
Excel, would appear as follows:
MeasResult
SA:TXP
A.10.53 N9030A
526 ALV ATP B1X B1Y B25 B40 BBA
CR3 CRP DCF DDA DP2 DRD EA3
EDP EMC EP1 ERC ESC ESP EXM
FSA LFE LNP MAT MPB NFE NUL
P26 PFR PNC RTL RTS S40 SB1 SEC
1
2394 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)