Keysight x-series Programmer's Reference

4 System
4.4 Power On
–
"Configuration list (Remote Command Only)" on page 1888
–
"Configuration Memory Available (Remote Query Only)" on page 1888
–
"Configuration Memory Total (Remote Query Only)" on page 1888
–
"Configuration Memory Used (Remote Query Only)" on page 1889
–
"Configuration Application Memory (Remote Query Only)" on page 1889
4.4.7.1 Configuration list (Remote Command Only)
Used to set or query the list of applications to be loaded in-memory.
Remote
Command
:SYSTem:PON:APPLication:LLISt <string of INSTrument:SELect names>
:SYSTem:PON:APPLication:LLISt?
Example
:SYST:PON:APPL:LLIS "SA,BASIC,WCDMA"
Notes <string of INSTrument:SELect names> contains items that are valid options for the
:INSTrument:SELect command
The order of the <INSTrument:SELect names> specifies the order in which the applications are
loaded into memory, and the order that they appear in the Mode menu
Error message -225 "Out of Memory" is reported when more applications are listed than
can reside in virtual memory. When this occurs, the existing applications load list is unchanged
Preset Not affected by Preset
State Saved Not saved in instrument state
4.4.7.2 Configuration Memory Available (Remote Query Only)
Returns the amount of Virtual Memory remaining.
Remote
Command
:SYSTem:PON:APPLication:VMEMory[:AVAilable]?
Example
:SYST:PON:APPL:VMEM?
Preset Not affected by Preset
4.4.7.3 Configuration Memory Total (Remote Query Only)
Returns the limit of Virtual Memory allowed for applications.
Remote
Command
:SYSTem:PON:APPLication:VMEMory:TOTal?
Example
:SYST:PON:APPL:VMEM:TOT?
Preset Not affected by Preset
Vector Modulation Analyzer Mode User's &Programmer's Reference 1888

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)