Keysight x-series Programmer's Reference

3 VMA Mode
3.2 Custom OFDM Measurement
Synchronization Search Offset
Sets the synchronization search offset (in symbols) used when synchronizing to the
signal.
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:SEARch:OFFSet <int>
[:SENSe]:OFDM:CCARrier0|…|7:SYNChronize:SEARch:OFFSet?
Example
:OFDM:CCAR0:SYNC:SEAR:OFFS 0
:OFDM:CCAR0:SYNC:SEAR:OFFS?
Preset 0
State Saved Saved in instrument state
Min 0
Max Depends on Max Result Length
Compensate Symbol Clock Error
Enables or disables the internal adjustment in the timing of the symbol clock.
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:SYMBol:COMPensate:CERRor OFF | ON | 0 | 1
[:SENSe]:OFDM:CCARrier0|…|7:SYMBol:COMPensate:CERRor?
Example
:OFDM:CCAR0:SYMB:COMP:CERR 0
:OFDM:CCAR0:SYMB:COMP:CERR?
Preset OFF
State Saved Yes
Range Hex|Binary
EVM Normalized by Reference
Specifies EVM normalized to the IQ Reference signal power.
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:EVMNorm OFF | ON | 0 | 1
[:SENSe]:OFDM:CCARrier0|…|7:EVMNorm?
Example
:OFDM:CCAR0:EVMN 1
:OFDM:CCAR0:EVMN?
Preset ON
State Saved Yes
Vector Modulation Analyzer Mode User's &Programmer's Reference 528

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)