To Next Page

To Previous Page

4 System

4.1 System

Example

:SYST:SHOW SYST

4.1.1.1 Show System contents (Remote Query Only)

Returns the contents of the Show System screen (the entire contents, not just the

currently displayed page).

Remote

Command

:SYSTem:CONFigure[:SYSTem]?

Example

:SYST:CONF?

Notes The output is an IEEE Block format of the Show System contents. Each line is separated by a new-line

character

4.1.1.2 Computer System description (Remote Query Only)

Returns the Computer System description, which consists of the operating system

and patch level, as reported by operating system.

Remote Command

:SYSTem:CSYStem?

Example

:SYST:CSYS?

Notes Returns the Computer System name and service pack level

4.1.2 Show Hardware

Displays details of the installed hardware. This information can be used to

determine versions of hardware assemblies and field-programmable devices, in the

advent of future upgrades or potential repair needs.

The screen is divided into two groups: product descriptive information and hardware

information. The hardware information is listed in a table format.

Example

:SYST:SHOW HARD

4.1.3 Show LXI

Displays the product number, serial number, firmware revision, computer name, IP

address, Host ID, LXI Class, LXI Version, MAC Address, and the Auto-MDIX

Capability.

Example

:SYST:SHOW LXI

Vector Modulation Analyzer Mode User's &Programmer's Reference 1838

Keysight x-series Programmer's Reference

Other manuals for Keysight x-series