3 VMA Mode
3.3 Monitor Spectrum Measurement
Meas Mode Preset
WAV BASIC, WCDMA, WLAN, LTEAFDD, LTEATDD, 5GNR, VMA OFF
MON WCDMA, WLAN, LTEAFDD, LTEATDD, 5GNR, VMA OFF
RHO WCDMA OFF
CDP WCDMA OFF
PCON WCDMA OFF
EVMQ WCDMA OFF
CHP WCDMA, WLAN, LTEAFDD, LTEATDD, 5GNR, VMA, SA OFF
OBW WCDMA, WLAN, LTEAFDD, LTEATDD, 5GNR, VMA, SA OFF
ACP WCDMA, LTEAFDD, LTEATDD, 5GNR, VMA, SA OFF
SEM WCDMA, WLAN, LTEAFDD, LTEATDD, 5GNR, VMA, SA OFF
PST WCDMA, WLAN, LTEAFDD, LTEATDD, 5GNR, VMA, SA OFF
PVT WLAN, LTEAFDD, LTEATDD, 5GNR OFF
EVM WLAN, LTEAFDD, LTEATDD, 5GNR OFF
FLAT WLAN OFF
EVMM WLAN OFF
CEVM LTEAFDD, LTEATDD OFF
PAVT 5GNR, VMA OFF
DDEM VMA OFF
OFDM VMA OFF
SAN SA ON
HARM SA ON
3.3.4 BW
Opens the Bandwidth (BW) menu, which contains controls for the Resolution
Bandwidth and Video Bandwidth functions of the instrument.
3.3.4.1 Settings
Contains the basic bandwidth functions. It is the only tab under BW.
Res BW
Activates the resolution bandwidth active function, which allows you to manually set
the Resolution Bandwidth (RBW) of the instrument.
Normally, Res BW (Auto) selects automatic coupling of the Res BW to Span using
the ratio set by the Span:3 dB RBW control (some measurements do not have a
Span:3 dB RBW control, in which case the measurement chooses the optimal ratio).
605 Vector Modulation Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
Need help?
General
