Keysight x-series Programmer's Reference

7 Save/Recall/Print
7.3 Save
SM1 TVT YAS YAV
Center Frequency 1.33E+10
TXP_InfoBw 3000000
TXP_Used_CaptureTime 0.00064
MeasResult1 MeasResult2 MeasResult3 MeasResult4
0
-999
7.3.21 IQ Waveform Meas Results File Contents
An IQ Waveform Meas Results File contains measurement results with the following
header information:
–
File ID string, which is “MeasResult”
–
Measurement ID following Mode ID, for example, WCDMA:WAV
–
Firmware rev and model number
–
Option string
–
Center Frequency
–
Input Port
–
Info BW
–
Capture Time
The data above is followed in the file by a line containing MeasResult0,
MeasResult1, and MeasResult2. This line forms a header for each set of
measurement results, which appear in subsequent lines. Each line of Measurement
Results consists of 3 comma-separated values.
The MeasResult0 set in the file corresponds to the data returned by
MEAS|READ|FETCh:WAVeform0; the MeasResult1 set corresponds to the data
returned by :MEAS|READ|FETCh WAVeform1, and the MeasResult2 set
corresponds to the data returned by :MEAS|READ|FETCh WAVeform2. See
"Remote Command Results" on page 673 for details.
The exported file is in CSV format, with a .csv extension.
Meas Results File Example
When imported into Microsoft Excel or a similar spreadsheet application, a typical
Meas Results CSV file appears as shown in the example below.
Vector Modulation Analyzer Mode User's &Programmer's Reference 2395

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)