Keysight x-series Programmer's Reference

3 VMA Mode
3.2 Custom OFDM Measurement
–
Span/RBW Ratio
–
Sweep Time
–
Video BANDwidth VBW/RBW ratio
–
Upper and Lower Tone (set to Sense)
–
Zero span measurement Resolution Bandwidth
–
Zero span measurement Dwell Time
Harmonics (SA Mode only)
Parameters affected by Auto Couple are:
–
Resolution Bandwidth
–
Fundamental Frequency
–
Dwell Time
–
Range Table Resolution Bandwidths
–
Range Table Dwell Times
Meas Preset
Restores all measurement parameters to their default values.
Remote Command
:CONFigure:OFDM
Example
:CONF:OFDM
Notes Restore all defaults of parameters
3.2.8.3 Meas Standard
Contains controls for setting the radio standard to which the current measurement
will be made.
Preset to Std
Displays a menu for selecting preset Custom OFDM Setup parameters. Does not
prevent you from making adjustments to measurement parameters afterwards. The
following standard presets are available:
495 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)