7 Save/Recall/Print
7.3 Save
Compatibility
SCPI
For Digital Demod only
7.3.65 Pilot IQ Values
Selects a CSV file to export the pilot IQ values. Note the CSV file for MIMO contains
IQ data for multiple layers so the format is different than SISO.
Remote
Command
:MMEMory:STORe:OFDM:IQPilot CC0 | … | CC7,<filename>
Example
:MMEM:STOR:OFDM:IQP CC0,"pilotIQ.csv"
Notes If the save is initiated via SCPI, and the file already exists, the file will be overwritten
Using the C: drive is strongly discouraged, since it runs the risk of being overwritten during an
instrument software upgrade
Both single and double quotes are supported for any filename parameter over SCPI
Status Bits/OPC
dependencies
Sequential - waits for previous measurement to complete
7.3.66 Preamble IQ Values
Selects a CSV file to export the preamble IQ values. Note the CSV file for MIMO
contains IQ data for multiple layers so the format is different than SISO.
Remote
Command
:MMEMory:STORe:OFDM:IQPReamble CC0 | … | CC7,<filename>
Example
:MMEM:STOR:OFDM:IQPR CC0,"pmblIq.csv"
Notes If the save is initiated via SCPI, and the file already exists, the file will be overwritten
Using the C: drive is strongly discouraged, since it runs the risk of being overwritten during an
instrument software upgrade
Both single and double quotes are supported for any filename parameter over SCPI
Status Bits/OPC
dependencies
Sequential - waits for previous measurement to complete
7.3.67 Screen Image
Selects a file for saving the contents of the display.
Screen Image files are PNG (Portable Network Graphics) files with the same
resolution as the data display. They contain the image that was on the screen before
you opened the Save dialog. When the Screen Image key is pressed, a "thumbnail"
Vector Modulation Analyzer Mode User's &Programmer's Reference 2417
To Next Page
Loading...
Need help?
General
