Keysight x-series Programmer's Reference

3 VMA Mode
3.4 IQ Waveform Measurement
Preset 0.2
State Saved Saved in instrument state
Min 0.01
Max 1.00
Backwards Compatibility
SCPI
[:SENSe]:WAVeform:WBIF:FILTer:ALPHa
Channel Filter Bandwidth (Backwards Compatibility Remote Command Only)
Dependencies Only available when Option DP2, B40, or wider IF Bandwidth option is installed
Couplings The value is determined by the following equation
ChannelFilterBwBwcc = (ChannelFilterBw/(DigitalIFBw*OverSampleRatio))
Preset 0.8
State Saved Saved in instrument state
Min 0.01
Max 1.0
Backwards
Compatibility SCPI
[:SENSe]:WAVeform:WBIF:FILTer:BANDwidth <real>
[:SENSe]:WAVeform:WBIF:FILTer:BANDwidth?
3.4.5 Display
Lets you configure display items for the current Mode, Measurement, View, or
Window.
3.4.5.1 View
Contains controls for selecting the current View, and for editing User Views.
View
See "Views" on page 674.
User View
Lets you choose a View from the saved User Views for the current measurement.
This panel only appears if a User View exists for the current measurement.
Remote
:DISPlay:VIEW:ADVanced:SELect <alphanumeric>
Vector Modulation Analyzer Mode User's &Programmer's Reference 730

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)