Keysight x-series Programmer's Reference

3 VMA Mode
3.10 Spurious Emissions Measurement
–
Center Frequency Step
–
Resolution Bandwidth
–
Span/RBW Ratio
–
Sweep Time
–
Video BANDwidth VBW/RBW ratio
–
Upper and Lower Tone (set to Sense)
–
Zero span measurement Resolution Bandwidth
–
Zero span measurement Dwell Time
Harmonics (SA Mode only)
Parameters affected by Auto Couple are:
–
Resolution Bandwidth
–
Fundamental Frequency
–
Dwell Time
–
Range Table Resolution Bandwidths
–
Range Table Dwell Times
Meas Preset
Restores all measurement parameters to their default values.
Remote Command
:CONFigure:SPURious
Example
:CONF:SPUR
Fast Spurious Meas (Remote Command only)
This command is the backward compatibility command for the Fast Spurious
Measurement. Since this command is another representation of Spurious Report
Mode, it is coupled with that command.
–
When set to ON, only spurs above the limit line are reported. This is the same as
Spurious Report Mode LIMTest
Vector Modulation Analyzer Mode User's &Programmer's Reference 1716

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)