Keysight x-series Programmer's Reference

3 VMA Mode
3.9 SEM Measurement
increases to 2N, 3N and so on. The value is the same as "Avg/Hold Num" on page
1475 unless Continue Averaging is pressed, and it is reset to match the Avg|Hold
Number when Restart is pressed.
Remote
Command
[:SENSe]:SEMask:AVERage:COUNt:TERMinal?
Example
:SEM:AVER:COUN:TERM?
Averaging On/Off
Turns Averaging on or off.
NOTE
In this measurement, Average Type is preset to the Log-Pwr Avg (Video)
method. Other averaging methods are not available.
Remote Command
[:SENSe]:SEMask:AVERage[:STATe] ON | OFF | 1 | 0
[:SENSe]:SEMask:AVERage[:STATe]?
Example
:SEM:AVER ON
:SEM:AVER?
Preset
OFF
State Saved Saved in instrument state
Range
ON|OFF
Meas Method
Sets the measurement method:
Method Option Description
Integration BW
0|OFF
Enables you to set the channel integration bandwidth
RRC Weighted
1|ON
Selects Root Raised Cosine (RRC) filtering of the carriers. The a
value (rolloff) for the filter is set to the value of the Filter Alpha
parameter
Remote Command
[:SENSe]:SEMask:FILTer[:RRC][:STATe] OFF | ON | 0 | 1
[:SENSe]:SEMask:FILTer[:RRC][:STATe]?
Example
:SEM:FILT ON
:SEM:FILT?
Dependencies WLAN: RRC Weight is not supported when the radio standard is WLAN 802.11ac (80+80MHz)
Preset
SA, LTEAFDD, LTEATDD, 5G NR, WLAN, MSR Modes
OFF
WCDMA Mode
ON
1477 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)