Keysight x-series Programmer's Reference

5 Preset
5.9 Restore Defaults All Modes
5.9 Restore Defaults All Modes
Resets all Modes in the current Screen back to their default states, just as Restore
Mode Defaults does, switches the current Screen to the Power-on Mode, and
causes the default measurement for the Power On Mode to be active in the current
Screen. Only the current Screen is affected.
Restore Defaults All Modes can be executed from the "Preset Dropdown" on page
1995.
When Restore Defaults All Modes is selected, a message appears saying:
This will reset all of the variables for all of the Modes in the current Screen
to their default state. This action cannot be undone. Do you want to proceed?
The message provides OK and Cancel buttons.
Example
:SYST:DEF MOD
Couplings Causes the currently running measurement to be aborted, a switch to the Power-on Mode, and
activates the default measurement for the Power-on Mode
2005 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)