Keysight x-series Programmer's Reference

10 Hardware-Accelerated Fast Power Measurement (Remote Command Only)
10.6 Fetch Fast Power Measurement (Remote Command Only)
10.6 Fetch Fast Power Measurement (Remote Command Only)
Used to retrieve the results of an acquisition initiated by :INIT. The returned results
are in ASCII string format. The string begins and ends with quotation marks.
Remote
Command
:CALCulate:FPOWer:POWer[1,2,…,999]:FETCh?
Example
:CALC:FPOW:POW1:FETC?
Notes Option FP2 is required
Returns m comma-separated ASCII values, where m corresponds to the number of bandwidths defined
1. Declared function return in the 1st specified channel
2. Declared function return in the 2nd specified channel
…
m. Declared function return in the last specified channel
The INIT and FETC? command sequence has the same effect as a single CALC:FPOW:POW[n]?
query. Units of the returned values depend on "Channel Measurement Function Array" on page 2640 for
each channel
2646 Vector Modulation Analyzer Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)