Keysight x-series Programmer's Reference

3 VMA Mode
3.2 Custom OFDM Measurement
Meas Interval
Specifies how much time data (in symbols), within "Result Length" on page 503, is
used for measurement analysis data (computing the trace and symbol table data
results). Meas Interval is entered as an integer number of symbols.
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:TIME:INTerval <integer>
[:SENSe]:OFDM:CCARrier0|…|7:TIME:INTerval?
Example
:OFDM:CCAR0:TIME:INT 15
:OFDM:CCAR0:TIME:INT?
Preset 60
State Saved Yes
Min 1
Max Depends on the Result Length
Meas Offset
Specifies the start position of the "Meas Interval" on page 504 with respect to the
first symbol within "Result Length" on page 503. Meas Interval is entered as an
integer number of symbols.
The sum of Meas Interval and Meas Offset must not exceed Result Length.
Remote
Command
[:SENSe]:OFDM:CCARrier0|…|7:TIME:OFFSet <integer>
[:SENSe]:CCARrier0|…|7:OFDM:TIME:OFFSet?
Example
:OFDM:CCAR0:TIME:OFFS 0
:OFDM:CCAR0:TIME:OFFS?
Preset 0
State Saved Yes
Min 0
Max Depends on "Result Length" on page 503
Capture Time Diagram
Accesses a menu that lets you set up time parameters.
Burst Search
Used by the pulse search algorithm to detect the start and end of the analyzed burst
(or pulse).
Vector Modulation Analyzer Mode User's &Programmer's Reference 504

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)