Lantronix SISPM1040-xxxx-L3 Web User Guide
33856 Rev. A https://www.lantronix.com/ 331
cm_uMSCML D: useMgtSettableComputeMeanLinkDelay - This value determines the source of the value of
computeMeanLinkDelay. 'True' indicates source as 'mgtSettableComputeMeanLinkDelay'. Otherwise, initial value
or value set by LinkDelayInterval state machine is used.
cm_MSCMLD: mgtSettableComputeMeanLinkDelay - This value indicates the input through management
interface whether to compute Mean Link Delay or not.
cm_ALR: allowedLostResponses - The number of Pdelay_Req messages for which a valid response is not
received, above which a Link Port is considered to not be exchanging peer delay messages.
cm_AFs: allowedFaults - The number of faults, above which asCapableAcrossDomains is set to FALSE.
Buttons
Apply : Click to save changes.
Reset : Click to undo any changes made locally and revert to previously saved values.
To Next Page
Loading...
Need help?
General
